Differences

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Last revision Both sides next revision
auto_pier_flip_option [2010/05/24 16:43]
127.0.0.1 external edit
auto_pier_flip_option [2012/06/28 15:06]
jon
Line 10: Line 10:
 {{wiki:​eqmodascomsetup2.png}} {{wiki:​eqmodascomsetup2.png}}
  
-Only if this option is checked is the user able to set EQASCOM to perform automatic flips. Assuming this is the case the auto flip action itself can be enabled/​disabled via Limits Setup form. If enabled the flip is applied whenever the RA limits are reached (so not necessarily at the meridian). The PC will issue a short two tone beep sequence prior to initiating the flip to give you time to clear the area, prepare catch falling eyepieces, cut any snagging cables and hit the emergency stop! + 
 + 
 +Only if this option is checked is the user able to set EQASCOM to perform automatic flips. Assuming this is the case the auto flip action itself can be enabled/​disabled via Limits Setup form available from the main window. 
 + 
 + 
 + 
 +Select the configure button: 
 + 
 +{{wiki:​configurebutton.png}} 
 + 
 +from the Mount Limits panel on the main window: 
 + 
 + 
 + 
 +{{wiki:​mountlimitspanel.png}} 
 + 
 +then enable the option in the General Options panel: 
 + 
 +{{wiki:​generaloptionsautoflip.png}} 
 + 
 + If enabled the flip and the Enable Limits option is enabled, auto-flip is applied whenever the RA limits are reached (so not necessarily at the meridian). The PC will issue a short two tone beep sequence prior to initiating the flip to give you time **to clear the area, prepare catch falling eyepieces, cut any snagging cables and hit the emergency stop! **
  
/home/welshdra/public_html/eqmod/data/pages/auto_pier_flip_option.txt · Last modified: 2012/07/14 17:24 by jon
 
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki